false

/content/advancedmaterials/us/en/search-results.html
 

Performance Additives for Adhesives

Enhance Performance.
Improve Processing.
Increase Value.

Contact Sales


Solstice performance additives are designed to enhance performance, improve processing, and increase the value of your adhesives. Our A-C®, ACumist® and Cohesa® brand polymers help to extend the range of your hot melt adhesives by influencing a variety of different properties, improving cold and high temperature performance and low surface energy substrate adhesion, lowering application temperature, oil migration control, which helps your adhesives become more competitive. Each additive in our product line is backed by Solstice's consistent quality, customer service, and reliable global supply network. We are the world’s leading manufacturers of low molecular weight polyethylene additives. Solstice's technical support is prepared to help you identify and apply the additives you need for your specific application.

Hot melt adhesive composition

  • Polymer: 33%
  • Tackifying resin: 33%
  • Waxes and diluents: 33%
  • Solstice additives: 1–10%

Polymer

Strength, flexibility, heat resistance

Tackifying resin

Wetting, adhesion, tack

Solstice additives

Viscosity control, wetting and adhesion, strength, open and set time, tack, oil migration control, heat resistance

Waxes and diluents

Viscosity control, open and set time

Solstice additives can provide functionality to your formulation.

Your search for the right product begins with the broad selection of additives Solstice manufactures, and those products offer a variety of benefits for virtually any type of adhesive chemistry:

Ethylene vinyl acetate (EVA)

  • Increased adhesion
  • Reduced processing times
  • Modify set times
  • Improved hot and cold temperature resistance
  • Increased wetting

Styrenic block copolymers (SBC)

  • Increased adhesion
  • Oil migration control
  • Plasticizer migration

Metallocene polyolefins (MEO and MPP)

  • Increased adhesion to low surface energy substrates
  • Improved cold temperature adhesion
  • Reduced set times
  • Improved heat resistance

Polyamides plasticize migration (PA)

  • Reduced viscosity
  • Improved set speed

Amorphous poly-alphaolefins (APAO)

  • Increased adhesion to low surface energy substrates
  • Reduced adhesive stringing
  • Increased heat resistance
  • Modify set speed

Contact Sales

Key Benefits Of A-C® Performance Additives

Even on dissimilar surfaces and/or low surface energy substrates, A-C performance additives help your hot melt formulation achieve greater adhesion strength. Whether the surface is polypropylene (PP), polycarbonate (PC), polyvinyl chloride (PVC), polyethylene (PE), polyethylene terephthalate (PET) or coated and uncoated kraft cardboard, A-C performance additives are designed to improve your product’s ability to adhere to virtually any surface.

  • Control: Viscosity @ 350F (177°C) approx. 14,400; Vinyl/wood adhesion approx. 4.8 PLI; Canvas/steel adhesion approx. 2 PLI; PP lap shear approx. 100 PSI; PAFT approx. 40°C; SAFT approx. 111°C
  • MAPP Polymer (87 SAP): Viscosity @ 350F (177°C) approx. 12,400; Vinyl/wood adhesion approx. 6.1 PLI; Canvas/steel adhesion approx. 2.9 PLI; PP lap shear approx. 138 PSI; PAFT approx. 119°C; SAFT approx. 131°C

These additives also reduce the viscosity of your formulation, which helps to improve adhesion and wetting on the substrate. A-C performance additives even boost your hot melt’s ability to adhere to substrates at freezer temperatures.

  • Control: Coated Carton Bonds (2°C) 50%; Inland Corrugated (2°C) 50%
  • A-C 9 (PE): Inland Corrugated (2°C) 100%; Inland Corrugated (-18°C) 50%
  • A-C 1089 (PP): Coated Carton Bonds (2°C) 100%; Inland Corrugated (2°C) 100%
  • A-C 573 (MAPE): Coated Carton Bonds (2°C) 100%; Inland Corrugated (2°C) 100%; Inland Corrugated (-18°C) 100%
  • A-C 596P (MAPP): Coated Carton Bonds (2°C) 100%; Inland Corrugated (2°C) 100%; Inland Corrugated (-18°C) 75%
  • A-C 597P: Coated Carton Bonds (2°C) 100%; Inland Corrugated (2°C) 100%; Inland Corrugated (-18°C) 100%

With their ability to lower the viscosity of your formulation, A-C performance additives help to reduce your batch mixing times. They also decrease your product’s set time, which means your adhesive customers can boost their productivity.

  • G′ elastic modulus (Pa, log scale) against temperature from 60°C to 110°C.
  • EVA with Tackifier & A-C 8: approx. 10^6 Pa at 60°C, easing to approx. 10^4.7 Pa near 90°C, then dropping steeply at the end of open time around 93°C to below 10 Pa by 99°C, and levelling at approx. 5 Pa up to 110°C.
  • EVA with Tackifier only: approx. 200 Pa at 60°C, falling steadily to approx. 1 Pa by 89°C and approx. 0.02 to 0.1 Pa between 100°C and 110°C.

By reducing the viscosity of your formulation, A-C performance polymers lower its application temperature, which improves application speed and reduces energy costs. This also improves the formulation’s adhesion to heat sensitive substrates, such as plastic, without affecting its heat resistance performance.

  • Viscosity of EAA/Polyamide HMA blends, cps at 190°C, by percentage added.
  • A-C 5120 (650cps): Control approx. 9,100; 2% approx. 5,900; 4% approx. 2,900; 6% approx. 1,500.
  • A-C 580 (650cps): Control approx. 9,100; 2% approx. 5,900; 4% approx. 3,000; 6% approx. 2,000.

To improve Heat Resistance, when your customers’ specifications call for a heat resistant hot melt, A-C performance additives can be used to elevate the softening point of your formulation. This will help to ensure your product can withstand higher temperatures.

  • SAFT temperature (°C). A-C 6: 0% A-C approx. 75°C; 7.5% A-C approx. 105°C.
  • A-C 9: 0% A-C approx. 75°C; 7.5% A-C approx. 118°C.

A-C performance additives feature a unique ability to hold oils that can bleed from your adhesive, which helps to maintain the strength of the adhesive and preserves the aesthetics of paper and labelling. They can also reduce plasticizer bleeding from PVC films, preventing the adhesive from softening which could lead to adhesive failure.

  • Rating of staining (5 = none, 1 = high). Control: 3 at 50°C after 4 weeks; 1 at 70°C after 2 weeks.
  • 2% A-C 400: 4 at 50°C after 4 weeks; 4 at 70°C after 2 weeks.
  • 2% A-C 580: 4 at 50°C after 4 weeks; 4 at 70°C after 2 weeks.

Staining

5 - None 4 - Very slight 3 - Slight 2 - Moderate 1 - High

Product Applications

From packaging to woodworking, A-C performance additives have been used to improve adhesives and sealants for more than five decades. When you use Solstice A-C performance additives, you benefit from technical support specialists that understand your application. These specialists are experts in the chemical, physical and application-based properties of our additives, and can help you quickly identify the additives best suited for your needs. Whether you are seeking to improve your product’s heat or aging resistance, or enhance its adhesion, Solstice experts can find the right blend to improve your formulation.

PACKAGING

From packaging to woodworking, A-C performance additives have been used to improve adhesives and sealants for more than five decades. When you use Solstice A-C performance additives, you benefit from technical support specialists that understand your application. These specialists are experts in the chemical, physical and application-based properties of our additives, and can help you quickly identify the additives best suited for your needs. Whether you are seeking to improve your product’s heat or aging resistance, or enhance its adhesion, Solstice experts can find the right blend to improve your formulation.

BOOKBINDING

Help your hot melt reach the level of strength, flexibility and durability bookbinding requires. A-C performance additives help to promote adhesion over the lifetime of a bind, while offering greater processing speeds on your customer’s production lines.

WOODWORKING

The difficulty of adhering PVC or PP foils to wood, can be overcome with an additive that works with your formulation, to reduce stringing and resist heat. With the help of A-C performance additives, you can increase adhesive strength in extreme temperatures, while optimizing the set time of your adhesives to wood substrates.

HYGIENE

A-C performance additives reduce the viscosity and lower the application temperature of your formulation in hygienic applications, such as diapers. Your customers will benefit from improved wetting and the ability to apply your product at higher line speeds.

TAPE AND LABEL

Boost adhesion strength on the low surface energy substrates often encountered in tape and label applications. A-C performance additives and Cohesa also help to stabilize the oils that can bleed into paper, ensuring the aesthetic appeal of your customer’s product is maintained.

SPECIALTY APPLICATIONS

A-C and ACumist performance additives are used in many specialty applications, including adhesive pellet detackification and the extension of Fischer-Tropsch waxes. Contact our technical support team today to learn how we can meet the needs of your specific application.


Recommended Products for Adhesion Enhancement by Substrate and Adhesive Chemistry*

Substrate Adhesive Chemistry
Styrenic Block Copolymers Metallocene Polyolefins Amorphous Poly-Alpha-Olefins Polyamides Ethylene Vinyl Acetate
Kraft or Coated Carton A-C EVA, A-C MAPP A-C PE, A-C MAPE, A-C MAPP A-C MAPE, A-C MAPP, A-C PP A-C EAA A-C PE, A-C EVA, A-C MAPP
Polyethylene A-C EVA, A-C MAPP, A-C MAPE A-C MAPE, A-C MAPP, A-C PP A-C MAPE, A-C MAPP, A-C PP A-C EAA A-C PE, A-C EVA, A-C MAPP
Polypropylene A-C EVA, A-C MAPP, A-C MAPE A-C MAPE, A-C MAPP, A-C PP A-C MAPE, A-C MAPP, A-C PP A-C EAA A-C PE, A-C EVA, A-C MAPP
PVC A-C EAA A-C EAA A-C EAA A-C EAA A-C EAA

Product Lines

Solstice offers several different lines of A-C performance additives to fit your specific application:

EVA Copolymer MAPP Copolymer PE Homopolymer MAPE Copolymer EAA Copolymer PP HDPE LDPE LDOPE MDPE Homopolymer
A-C® 400 A-C® 1325P A-C® 1702 A-C® 573 A-C® 5120 A-C® 1754 A-C® 316 A-C® 6 A-C® 680 A-C® 820A
  A-C® 596P A-C® 573   A-C® 540   A-C® 325 A-C® 617    
  A-C® 597 A-C® 596P   A-C® 580   A-C® 330 A-C® 8    
  A-C® 907P     Cohesa® 0001   A-C® 392 A-C® 9    
  A-C® 950P     Cohesa® 0002          
        Cohesa® 3055          

A Global Commitment To Technical Support

Every day, Solstice A-C performance additives are helping to improve the performance of products around the world. More than five decades of expertise in the development of low-molecular-weight polyethylene polymers is at your fingertips through Solstice's technical support services, with specialists who understand your application.

Technical Service Line: (800) 451-9961

Contact us today to learn more about what we can do for your products.