Portfolio
What Additives Does Solstice Offer for Paints and Coatings?
Solstice offers a comprehensive portfolio of LMW polyolefin additive technologies designed to address the full range of coatings formulation challenges.
A-C® Polyethylenes
The world's most versatile LMW additive family. Used globally for sag resistance, anti-settling, slip, and mar resistance across water-based, solvent-based, and 100% solids systems.
A-C® Polypropylenes
High-performance PP-based additives delivering superior hardness, scratch resistance, and thermal stability compared to polyethylene grades — ideal for demanding industrial and automotive coatings.
ACumist® Micronized Polymers
Precision-micronized particles engineered for COF reduction, abrasion resistance, and smooth haptic surface texture. Effective at concentrations below 2%.
NduroMatt® Multi-functional Additive
Non-porous polymeric matting additives that outperform conventional silicas — delivering better stain resistance, burnish resistance, and higher clarity in clear and pigmented systems.
Cohesa® Water-based Emulsions
High-solids polymer-in-water emulsions with low or zero surfactant content — compatible with a broad range of waterborne formulations and customizable for optimal performance.
AClyn® Ionomers
Ionomer-based additives providing exceptional adhesion promotion, intercoat adhesion, and compatibility with metallic substrates — used in specialty industrial and functional coatings.
Performance
What Are the Key Benefits of Solstice Additives for Coatings?
Improved Surface Durability and Protection
Solstice performance additives — including A-C®, ACumist®, Cohesa®, and NduroMatt® — significantly improve the resistance of coating surfaces to everyday damage: scratch, mar, scuff, burnish, and abrasion. They reinforce the coating surface without compromising the desired gloss effect.
Precise Rheology and Application Control
Rheology control is critical in any coating system. During application — a high-shear event — viscosity must break down for smooth application, then rapidly rebuild to prevent sagging and dripping, and finally reach high viscosity in storage to prevent settling and separation.
When added to solvent-based formulations, A-C Oxidized Polyethylenes form associations with other paint components, providing highly effective pigment suspension and sag control — resulting in improved application appearance and consistency.
Polyester-Melamine Baking Enamel
Anti-Settling Performance
At just 0.5% solids on total formula weight, A-C performance additives prevent solid particles and pigments from separating — a remarkable result at such a low additive level. (TiO₂ tested at 38% by total formula weight.)

Addition of A-C® 629, 656, or 645 at loadings as low as 0.5% greatly increases sag resistance and anti-settling properties in air-dried, solvent-based alkyd coatings.
Coefficient of Friction Reduction
Slip — measured as the coefficient of friction (COF) — is a critical property in many coatings applications. Optimal slip falls within both an upper and lower limit: for example, a coated bag must have enough slip to move along a production line, but not so much that stacking becomes unstable. Polyethylene dispersed at the coating surface is responsible for increased slip. Solstice offers a range of A-C grades that can be precisely tuned to control COF at various dosage levels, providing formulators with the flexibility to achieve the exact slip profile required..
Here’s a comparison of various A-C grades, demonstrating their ability to control the Coefficient of Friction, at various dosage levels.
ACumist micronized polyethylene particles, added to many types of coatings at low levels (typically < 2%), are very effective at lowering the COF.
Nitrocellulose Lacquer
COF vs. % PE Solids
Coefficient of Friction Modification
Clear UV Cured Coatings
Additive Level – 1% on Total Formula Weight
Effect of Acumist® micronized polyethylene on COF of a UV cured coating.
Superior Matting with Higher Clarity
NduroMatt multi-functional matting additives achieve efficient gloss reduction with minimal viscosity build — and deliver measurably higher clarity and better stain resistance than conventional synthetic silicas in both clear and pigmented systems.
Melt Flow Modification for Powder Coatings and Polishes
As low molecular weight thermoplastic materials, Solstice performance additives alter the melt flow properties of higher molecular weight film formers. This is particularly useful in:
- Powder coatings — lowering melt viscosity for better flow and leveling
- Floor polishes — enhancing buffability through a combination of pressure and frictional heating
- Substrate wetting applications — improving adhesion and coverage
Moisture and Chemical Resistance
Due to their hydrophobic nature, Solstice polyethylene additives provide increased moisture resistance — an important feature in applications such as anti-transpirant fruit coatings, anti-corrosion coatings, and polishes. Many Solstice polymers are also relatively inert and can resist acids, bases, and many solvents, especially at ambient temperatures.
Revolutionizing Surface Finishes with NduroMatt
NduroMatt is a next-generation, polymer-based additive that offers a clear advantage over traditional silica-based matting agents by combining efficient gloss reduction with enhanced surface performance in a single, multi-functional additive.
Its engineered particle size and distribution provide efficient light scattering for consistent gloss reduction, enabling formulators to achieve precise, low-gloss aesthetics.
Beyond matting, NduroMatt improves key surface properties such as abrasion, scratch, and burnish resistance, helping coatings maintain their appearance over time. The non-porous structure also contributes to better stain and dirt resistance, while supporting ease of dispersion in both solvent- and water-based systems.
By combining multiple performance benefits into a single additive, NduroMatt offers a versatile and reliable solution for modern paints and coatings formulations.
NduroMatt® Performance Data
See the Difference vs. Conventional Silica Matting Agents
Drag each slider to compare NduroMatt against synthetic silicas across burnish resistance, clarity, and stain resistance in real test conditions.
FAQ
Common Questions from Formulators
Solstice A-C, ACumist, Cohesa, and NduroMatt additives are specifically engineered to improve scratch, mar, scuff, and abrasion resistance in both water-based and solvent-based coatings. They reinforce the coating surface by reducing friction and contact damage without compromising gloss or film integrity.
Low molecular weight polyolefin additives associate with other paint components at rest to build a network that resists settling and sagging. Under shear during application, this network breaks down for easy spreading — providing excellent leveling and anti-sag performance simultaneously.
NduroMatt additives are non-porous polymeric particles providing efficient gloss reduction with minimal viscosity build, better stain resistance, improved mechanical surface properties, and measurably higher clarity in clear coatings — all in one additive versus multiple specialty silicas.
Yes. Solstice offers a broad range of additives compatible with water-based systems, including Cohesa emulsions, oxidized polyethylene emulsions, ACumist micronized grades, and NduroMatt 300-series products — all developed for low-VOC, waterborne formulation requirements.
Many Solstice additives are highly effective at very low concentrations. A-C sag-resistance and anti-settling additives typically perform at 0.5% solids on total formula weight; ACumist COF-reducing grades at less than 2%. Specific technical data sheets provide dosage guidance for each grade and application.
ACumist micronized polyethylene particles are the preferred choice for COF reduction across inks, varnishes, and coatings. Different ACumist grades (A, B, C, D, and P series) offer varying particle sizes and chemical profiles to suit specific COF targets and application requirements.







